shaft axial

轴轴向

常用释义

词性释义

轴轴向
例句
  • 全部
1·Experiments were performed to investigate surge problem of a single shaft axial flow turbojet engine during throttling.
对某型单轴涡喷发动机节流过程中的喘振故障进行了试验研究。
2·The shaft axial force first increases slightly with depth then decreases sharply, and the rate of decrease in rock is greater than that in sand and soil.
轴力随着深度先稍微增加,后逐渐减少,并且在岩层中减少的速度远比砂土中快。
3·The bearings are generally installed with a small axial clearance in order to compensate for length variations of shaft and housing.
轴承一般设一个小轴向间隙,以弥补轴和轴承座的长度变化。
4·Two bearings adjusted against one another are therefore required for the axial guidance of a shaft .
两个相互调整的轴承因此需要一个轴轴向引导。
5·When the shaft has axial load, it can be used in combination with other bearings.
当有轴向负荷时,应和其他轴承组合使用,它不限。
6·Two-way pressure has mounted on ball bearings between the shaft and two outer rings, in the middle ring and outer ring were added between the steel ball, able to withstand the two-way axial load.
双向压力球轴承有安装于轴上的中间圈和两个外圈,在中间圈与外圈之间分别加有钢球,能够承受双向轴向负荷。
7·A shaft in the box and a box cover wheel without axial or radial clearance is another factor to move, should refer to a box of round renovation measures.
条轴在条盒轮与条盒盖间无轴向或径向间隙是转动不灵的又一因素,应参照条盒轮的整修办法进行。
8·Motorcycle disk brake is widely used because of its small radial dimensions, axial application of force along the disk when braking, no bending moment on brake shaft and braking stability.
摩托车液压盘式制动器径向尺寸较小,制动时沿制动盘的轴向施力,制动轴不受弯矩,制动性能稳定,应用较广。
9·They are particularly suited to low specific gravity applications where the back-to-back design and center bush provide natural axial balance and additional shaft support.
该类型泵特别适合于低比重介质的工况, 在这种情况下背对背的设计及中间衬套可以产生自然的轴向平衡和附加的轴支撑。
10·It has strong rigidity and high locating accuracy, simultaneously, it can compensate the axial size error accused by the centre hole size of the shaft.
该顶尖刚性强、定位精度高,能补偿由于被加工轴的中心孔误差所引起的轴向尺寸误差。
更新时间:2025-02-22 23:51